CD74HC4316NSR

37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-SOIC (0.209, 5.30mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4316NSR
Package: 16-SOIC (0.209, 5.30mm Width)
Datasheet: -
Stock: 215
Description: 37ns, 37ns SPST - NO 170Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4316 16 Pins 100nA 4.5V 16-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.209, 5.30mm Width)
Number of Pins	16
Weight	200.686274mg
Operating Temperature	-55°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	170Ohm
Additional Feature	ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HC4316
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Nominal Supply Current	320μA
Max Supply Current	16μA
Throw Configuration	SPST
Turn On Delay Time	205 ns
Input Voltage (Max)	6V
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	200MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	205 ns
Max Dual Supply Voltage	5V
On-State Resistance (Max)	170Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Dual Supply Voltage	3V
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	5Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	37ns, 37ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NO
Signal Current-Max	0.025A
Height	2mm
Length	10.3mm
Width	5.3mm
Thickness	1.95mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4316NSR Overview

The electronic component is convenient to ship overseas because it is packed in a 16-SOIC (0.209, 5.30mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This analog switch is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around -55°C~125°C TA. Totally, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. A 4.5V voltage supply should turn on and run the electronic component. This electronic part can be found in the 16 series. The analog switch ics are built using SPST - NO switching circuits. Try searching for the analog switch ic with 74HC4316 if you are looking for variants. There is 170Ohm internal resistance in this digital multiplexer. Datasheets for 16 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 2V voltage fed to the electrical part below 2V. Putting voltage greater than 16μA on the multiplexer may cause damage. Despite this switch device's dual supply capability, its voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 1V. The transfer of data can be performed over 200MHz bandwidths. Additional features of the electronic component include: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.