Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-55°C~125°C TA |
Packaging |
Tube |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
170Ohm |
Additional Feature |
ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY |
Subcategory |
Multiplexer or Switches |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
4.5V |
Base Part Number |
74HC4316 |
Pin Count |
16 |
Polarity |
Non-Inverting |
Number of Channels |
4 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Max Supply Current |
16μA |
Throw Configuration |
SPST |
Turn On Delay Time |
47 ns |
Input Voltage (Max) |
6V |
Voltage - Supply, Single/Dual (±) |
2V~6V ±1V~5V |
Supply Type |
Dual, Single |
Bandwidth |
200MHz |
Neg Supply Voltage-Nom (Vsup) |
-4.5V |
Turn-Off Delay Time |
47 ns |
Max Dual Supply Voltage |
5V |
On-State Resistance (Max) |
170Ohm |
Min Dual Supply Voltage |
1V |
High Level Output Current |
25mA |
Dual Supply Voltage |
3V |
Low Level Output Current |
25mA |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
62 dB |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
5Ohm |
Switch Circuit |
SPST - NO |
Switch Time (Ton, Toff) (Max) |
37ns, 37ns |
Channel-to-Channel Matching (ΔRon) |
5 Ω |
Switching |
BREAK-BEFORE-MAKE |
Normal Position |
NO |
Signal Current-Max |
0.025A |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
Thickness |
1mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CD74HC4316PW Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Surface Mount position. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -55°C~125°C TA extended. In total, there are 16 terminations. This electronic part offers high-quality output due to its 4 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. There is an electrical component included in the 16 series. The analog switch ics are built using SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with 74HC4316. The internal resistance of this digital multiplexer is 170Ohm. For functions related to 16 pins, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Analog switch ics with Dual, Single supply type are cost-effective. A low voltage of 2V should be applied to the electronic component. A voltage higher than 16μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. It is possible to transfer data over a 200MHz-bandwidth. Don't forget the additional features of this electronic part, such as: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY.
CD74HC4316PW Features
4 Channels
Switch Circuit: SPST - NO
Bandwidth: 200MHz
Additional Features: ALSO OPERATES WITH 2V TO 10V (VCC-VEE) SUPPLY
CD74HC4316PW Applications
There are a lot of Texas Instruments CD74HC4316PW Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- Precision test equipment
- Audio and video routing
- Fiber In The Loop (FITL)
- Imaging
- PDH Multiplexers
- ATM
- Audio and video signal routing
- Data Acquisition Systems
- PDAs