CD74HC4351E

55ns, 50ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4351 20 Pins 200nA 4.5V 20-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4351E
Package: 20-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 259
Description: 55ns, 50ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4351 20 Pins 200nA 4.5V 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Number of Pins	20
Weight	1.1991g
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	1
Supply Voltage	4.5V
Terminal Pitch	2.54mm
Base Part Number	74HC4351
Pin Count	20
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	35 ns
Turn On Delay Time	300 ns
Input Voltage (Min)	2V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	275 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	145MHz
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	20mA
Dual Supply Voltage	3V
Low Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	10Ohm
Switch Time (Ton, Toff) (Max)	55ns, 50ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	450ns
Switch-off Time-Max	375ns
Normal Position	NC
Signal Current-Max	0.025A
Height	5.08mm
Length	24.33mm
Width	6.35mm
Thickness	4.57mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4351E Overview

Due to its 20-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tube. Through Hole is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 8:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, there have been 20 terminations. A 1 channel electronic part produces high-quality output. An 4.5V voltage supply should allow the electrical part to be turned on and run. As part of its design, the 20 series is equipped with this electronic component. 1 circuits are used in this analogue multiplexer. Search with 74HC4351 if you are looking for analog multiplexer variants. Analog switches have 130Ohm internal resistance. To find out what the 20 pins do, please refer to the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. The digital multiplexer has a low cost Dual, Single supply. 2V is the lowest voltage the electrical component should receive. Despite this switch's dual supply capability, its voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 1V. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. Operating 8 inputs is required. It is possible to transfer data over a 180MHz-bandwidth.