CD74HC4351M

55ns, 50ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4351 20 Pins 400nA 4.5V 20-SOIC (0.295, 7.50mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4351M
Package: 20-SOIC (0.295, 7.50mm Width)
Datasheet: -
Stock: 979
Description: 55ns, 50ns 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4351 20 Pins 400nA 4.5V 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Weight	500.709277mg
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4351
Pin Count	20
Number of Channels	1
Number of Circuits	1
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Nominal Supply Current	16μA
Propagation Delay	35 ns
Turn On Delay Time	300 ns
Input Voltage (Min)	2V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	275 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	145MHz
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	20mA
Dual Supply Voltage	3V
Low Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	73 dB
Current - Leakage (IS(off)) (Max)	400nA
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	10Ohm
Switch Time (Ton, Toff) (Max)	55ns, 50ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	450ns
Switch-off Time-Max	375ns
Normal Position	NC
Signal Current-Max	0.025A
Height	2.65mm
Length	12.8mm
Width	7.5mm
Thickness	2.35mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	20-SOIC (0.295, 7.50mm Width)
Number of Pins	20

CD74HC4351M Overview

Due to its 20-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Temperatures around -55°C~125°C TA are extended for operation. In total, 20 terminations have occurred. High-quality output is provided by the electronic component's 1 channels. When a voltage supply of 4.5V is used, the electronic component should be turned on and run. There are 20 pins injected into the electronic part body. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4351. Analog switches have 130Ohm internal resistance. Please refer to the datasheets for 20 pins functions. The analogue multiplexer in this example is a typical Multiplexer or Switches. In normalcircumstances, users should not exceed 6V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. A low voltage of 2V should be applied to the electronic component. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. You should attach at least 1V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. It is possible to operate 8 inputs. The transfer of data can be performed over 180MHz bandwidths.