CD74HC4352E

60ns, 55ns SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4352 20 Pins 200nA 4.5V 20-DIP (0.300, 7.62mm)

Manufacturer: Texas Instruments
Nocochips NO: 815-CD74HC4352E
Package: 20-DIP (0.300, 7.62mm)
Datasheet: -
Stock: 744
Description: 60ns, 55ns SP4T 130Ohm Analog Switches BREAK-BEFORE-MAKE 74HC4352 20 Pins 200nA 4.5V 20-DIP (0.300, 7.62mm)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Contact Plating	Gold
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Number of Pins	20
Weight	1.1991g
Operating Temperature	-55°C~125°C TA
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Number of Functions	1
Supply Voltage	4.5V
Base Part Number	74HC4352
Pin Count	20
Number of Channels	2
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Nominal Supply Current	16μA
Number of Bits	4
Throw Configuration	4PST
Propagation Delay	35 ns
Turn On Delay Time	375 ns
Input Voltage (Min)	2V
Logic Function	Demultiplexer, Multiplexer
Input Voltage (Max)	6V
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	2V~6V ±1V~5V
Supply Type	Dual, Single
Bandwidth	185MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	275 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	165MHz
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	20mA
Dual Supply Voltage	3V
Low Level Output Current	20mA
Multiplexer/Demultiplexer Circuit	4:1
Off-state Isolation-Nom	65 dB
Current - Leakage (IS(off)) (Max)	200nA
Channel Capacitance (CS(off), CD(off))	5pF 12pF
On-state Resistance Match-Nom	10Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	60ns, 55ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	5.08mm
Length	24.33mm
Width	6.35mm
Thickness	4.57mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

CD74HC4352E Overview

Shipping overseas is convenient due to the electrical component's packing in 20-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 4:1. An extended operating temperature of -55°C~125°C TA degrees Celsius. In total, 20 terminations have occurred. Due to its 2 channels, the electrical component produces high-quality output. In the case of a voltage supply of 4.5V volts, the electrical part can be powered up and run. As part of its design, the 20 series is equipped with this electronic component. On the other hand, analog switches can be constructed using SP4T switching circuits. It consists of 2 circuits. Try searching with 74HC4352 if you're looking for variants. There is 130Ohm internal resistance in this digital multiplexer. Datasheets for functions of 20 pins are available. Multiplexer or Switches is a typical switch device. Users should never supply a voltage higher than 6V to a switch device. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. There is no problem with using dual supply voltage, but it should not exceed 5V. With dual power supplies, you should attach at least 1V. It is integrated with DIFFERENTIAL MULTIPLEXER analog ICs. It is possible to operate 8 inputs. 185MHz-bandwidths can be used to transfer data between multiplexers. Its conductivity is 4-bit.