CD74HC4518E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Base Part Number | 74HC4518 |
| Pin Count | 16 |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 360 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 360 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Counter, Decade |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 51 ns |
| Trigger Type | Positive, Negative |
| Power Supply Current-Max (ICC) | 0.08mA |
| Count Rate | 35MHz |
| Timing | Synchronous |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC4518E Overview
A 16-DIP (0.300, 7.62mm)package is used for this device. There are 16 terminations used for its configuration. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. In this diagram, there are 2elements that are interconnected by wires. A total of 16pins are present on all components. Tubeis the packaging method used for this package. To connect the circuit's other components, there are 16pins. It is mounted in the direction of [0]. It is included in the HC/UHfamily. As a member of the 74HCseries, it is ideal for a wide range of applications. A logic type of Counter, Decade is adopted. It is recommended that the operating temperature be set to -55°C~125°C. Using a Through Holemounting type, it is mounted. Providing a supply voltage of 2V~6Vallows it to operate more reliably. It contains 4elements. When it comes to this electronic device, NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE are much important features. Its base part number, [0], contains more related parts. A voltage of 2V is the minimum supply voltage (Vsup). Frequency 60MHzdetermines its operation. Up to a maximum voltage of 6Vcan be supplied (Vsup). The device consumes quiescent current when it is at 8μA.
CD74HC4518E Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Frequency of 60MHz
CD74HC4518E Applications
There are a lot of Texas Instruments CD74HC4518E Counters & Dividers applications.
- ANALOG SIGNAL PROCESSING
- Fixed and programmable counters greater than 10
- Up Counters
- Analog multiplexing and demultiplexing
- ALGEBRAIC COMPUTATION
- DIVISION
- Communications Digital Frequency Synthesizers;
- Binary counter/decoder
- Counter control/timers
- Timing applications
