banner_page

CD74HC4520M96G4

2 Element 4.5V CMOS DUAL Counters & Dividers 74HC Series 74HC4520 16 Pins Up Positive, Negative 16-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CD74HC4520M96G4
  • Package: 16-SOIC (0.154, 3.90mm Width)
  • Datasheet: -
  • Stock: 589
  • Description: 2 Element 4.5V CMOS DUAL Counters & Dividers 74HC Series 74HC4520 16 Pins Up Positive, Negative 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-SOIC (0.154, 3.90mm Width)
Number of Pins 16
Weight 141.690917mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Series 74HC
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Additional Feature NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Packing Method TR
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 4.5V
Frequency 60MHz
Base Part Number 74HC4520
Pin Count 16
Number of Elements 2
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Load Capacitance 50pF
Propagation Delay 360 ns
Quiescent Current 8μA
Turn On Delay Time 360 ns
Reset Asynchronous
Family HC/UH
Logic Function Counter
Direction Up
Logic Type Binary Counter
Number of Bits per Element 4
Prop. Delay@Nom-Sup 51 ns
Trigger Type Positive, Negative
Power Supply Current-Max (ICC) 0.08mA
Count Rate 35MHz
Timing Synchronous
Height 1.75mm
Length 9.9mm
Width 3.91mm
Thickness 1.58mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CD74HC4520M96G4 Overview


The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. It is configured using 16terminations. The supply voltage of 4.5V enables it operate in a fully flexible way. 2 elements are interconnected in wires. A total of 16pins are present on all components. Packaging is based on Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. It is included in the HC/UHfamily. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. The logic type of Binary Counter is adopted. Setting the operating temperature to -55°C~125°C is recommended. There is a mounting type of Surface Mounton this device. When a supply voltage of 2V~6Vis provided, it can operate with greater reliability. The array stores 4bits in each element. The result may be yeswhen expressing the result in Pbfree code. It is important to note that NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLEare really important features of this electronic device. More related parts are available under its base part number 74HC4520. The packing of this product is performed by [0]. In the case of the supply voltage (Vsup), it can be as low as 2V. A frequency of 60MHzis used for operation. It is possible to reach a maximum supply voltage of 6VV (Vsup). During quiescent mode, it consumes 8μA current.

CD74HC4520M96G4 Features


Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
NEGATIVE EDGE TRIGGER TYPE ALSO POSSIBLE
Frequency of 60MHz

CD74HC4520M96G4 Applications


There are a lot of Texas Instruments CD74HC4520M96G4 Counters & Dividers applications.

  • Up Counters
  • Frequency division
  • MULTIPLICATION
  • Communications Digital Frequency Synthesizers;
  • Dual Up Counters
  • Clocks
  • TRUE RMS-TO-DC CONVERSION
  • Time delay circuits
  • Time Out Timer for Consumer-Application Industrial Controls
  • Frequency dividing circuits

Write a review

Note: HTML is not translated!
    Bad           Good