CD74HC533E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 1.1991g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HC533 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 265 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 50 ns |
| Control Type | ENABLE LOW |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Height | 5.08mm |
| Length | 24.33mm |
| Width | 6.35mm |
| Thickness | 4.57mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC533E Overview
A package called 20-DIP (0.300, 7.62mm) contains it. A package of Tube has been used. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch for this electrical device. According to Through Hole, this electronic part is mounted. The voltage supply is 2V~6V. A temperature of -55°C~125°C is used for operation. 74HC is the series number of this FPGA. The electronic part in this image has 8 bits. This device has been designed with 20 terminations available. The family 74HC533 includes it. In order to operate it, the supply voltage must be 4.5V. It has 20 pins that makes it easy to use. This electronic device is categorized as a HC/UH electronic device. With the design of the board, there are only 20 pins. Electronic parts are mounted using the Through Hole method. In this device, there is a total of 2 ports available for use. FF/Latches is the subcategory of this part. 6V is the maximum supply voltage (Vsup). There are 2/6V power supplies required for this machine to operate. The supply voltage (Vsup) should be greater than 2V. With an output current of 7.8mA, it is highly flexible in terms of design. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA of quiescent current without being affected by external factors. A total of 1 elements make up this object.
CD74HC533E Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC533 family
20 pin count
20 pins
2/6V power supplies
1 elements
CD74HC533E Applications
There are a lot of Texas Instruments CD74HC533E Latches applications.
- Parallel Input
- Shift right register
- Automotive HEV/EV Powertrain
- Pattern Generators
- Parallel Input
- Counting
- Timers
- Shift register
- Counter timers
- Accumulator Registers
