CD74HC563M
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 533 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC563 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 26 ns |
| Turn On Delay Time | 12 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 45 ns |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC563M Overview
20-SOIC (0.295, 7.50mm Width) contains it. A Tube package is used to package it. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. It operates with a supply voltage of 2V~6V. It is -55°C~125°C at the operating temperature. 74HC is the series number of this FPGA. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74HC563 family. The device is operated when the supply voltage is set to 4.5V. The 20 pind are equipped with it. It is a member of the HC/UH family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. This part can be found within the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. 2/6V power supplies are needed to operate it. It is recommended to have a higher supply voltage (Vsup) than 2V. Its 7.8mA output current allows for maximum design flexibility. Input lines are generated as binary equivalents by 8 output lines. This object is composed of 1 elements. There are also other characteristics of it, such as BROADSIDE VERSION OF 533.
CD74HC563M Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC563 family
20 pin count
20 pins
2/6V power supplies
1 elements
CD74HC563M Applications
There are a lot of Texas Instruments CD74HC563M Latches applications.
- Control circuits
- Automotive Infotainment
- Counter control
- Automotive ADAS
- Relay replacement
- Automatic test equipment
- Parallel data storage
- Frequency dividing
- Stacked or Push-Down Registers
- Parallel-to-Serial Data Conversion
