Parameters |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Through Hole |
Mounting Type |
Through Hole |
Package / Case |
20-DIP (0.300, 7.62mm) |
Number of Pins |
20 |
Weight |
1.1991g |
Operating Temperature |
-55°C~125°C |
Packaging |
Tube |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
2.54mm |
Base Part Number |
74HC573 |
Pin Count |
20 |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Power Supplies |
2/6V |
Supply Voltage-Min (Vsup) |
2V |
Number of Circuits |
8 |
Load Capacitance |
50pF |
Number of Ports |
2 |
Output Current |
7.8mA |
Number of Bits |
8 |
Propagation Delay |
30 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
30 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
7.8mA 7.8mA |
Logic Type |
D-Type Transparent Latch |
Control Type |
ENABLE LOW/HIGH |
Independent Circuits |
1 |
Number of Output Lines |
3 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
5.08mm |
Length |
24.33mm |
Width |
6.35mm |
Thickness |
4.57mm |
Radiation Hardening |
No |
CD74HC573E Overview
Package 20-DIP (0.300, 7.62mm) includes it. It is packaged in the way of Tube. It uses the output configuration Tri-State. This electrical device has a logic type of D-Type Transparent Latch. Electronic components are mounted using the Through Hole method. A 2V~6V supply voltage is required to operate it. A temperature of -55°C~125°C is used for operation. There are a number of FPGAs in this series, including this one. The design of this electronic part contains 8 bits. As far as this device is concerned, it has no terminations. There is no doubt that it belongs to the family 74HC573. The device works with a voltage of 4.5V for its supply voltage. It is equipped with 20 pin count. In the world of electronics, this electronic device belongs to the family of HC/UH. The pin configuration of the device is 20. Mounting this electronic component follows the Through Hole method. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. 6V is the maximum supply voltage (Vsup). The device is powered by 2/6V power supplies. A supply voltage (Vsup) greater than 2V is required. As the output current is 7.8mA, the design flexibility is maximum. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. The superior flexibility of the system is achieved through its use of 8 circuits.
CD74HC573E Features
20-DIP (0.300, 7.62mm) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
CD74HC573E Applications
There are a lot of Texas Instruments CD74HC573E Latches applications.
- Pseudo-random code generators
- Sample and hold register
- Shift left register
- Parallel data synchronization
- Meter applications
- Decade counting 7-segment decimal display
- A/D and D/A conversion
- Counting
- Buffer Storage
- Audio and video switching