CD74HC573M
| Parameters | |
|---|---|
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Additional Feature | BROADSIDE VERSION OF 373 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 8μA |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 30 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Prop. Delay@Nom-Sup | 53 ns |
| Control Type | ENABLE LOW/HIGH |
| Number of Input Lines | 9 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
CD74HC573M Overview
Package 20-SOIC (0.295, 7.50mm Width) includes it. Tube is the way it is packaged. Tri-State is used for the output it is configured with. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates at a voltage of 2V~6V. It operates at -55°C~125°C degrees Celsius. An FPGA in this series belongs to the 74HC family. This electronic part is designed with 8 Bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The family 74HC573 includes it. A 4.5V voltage supply is required for operation. 20 pins are provided. It is a member of the HC/UH family of electronic devices. There are 20 pins on it. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. This part is included in FF/Latches. When Vsup reaches 6V, the maximal supply voltage is reached. The device is powered by 2/6V power supplies. It is recommended to have a higher supply voltage (Vsup) than 2V. There are 9 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With 7.8mA, maximum design flexibility is ensured. The quiescent current consumed by it is 8μA because it is unaffected by external factors. 8 circuits enable it to achieve high performance. It also has characteristics of BROADSIDE VERSION OF 373.
CD74HC573M Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
CD74HC573M Applications
There are a lot of Texas Instruments CD74HC573M Latches applications.
- Flip-flops
- Ring counter
- Multi-line decoders
- Frequency dividing
- PCs and Notebooks
- Pseudo-random code generators
- Stacked or Push-Down Registers
- Shift right register
- Audio and video switching
- Relay replacement
