CD74HC573M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Cut Tape (CT) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 30 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 7.8mA 7.8mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC573M96 Overview
20-SOIC (0.295, 7.50mm Width) contains it. Cut Tape (CT) is the packaging method. There is a Tri-State output configured. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 2V~6V voltage supply is required for operation. A temperature of -55°C~125°C is used for operation. The 74HC series of FPGAs is the one this FPGA belongs to. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The family in which it belongs to is 74HC573. A 4.5V voltage supply is required for operation. The 20 pind are equipped with it. It is part of the family of electronic devices called HC/UH. This board has 20 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. In this device, there are 2 ports. The part is in the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. The system is powered by 2/6V sources. A supply voltage (Vsup) greater than 2V is required. On the basis of its reliability, this device is well suited for TR. Due to its 7.8mA output current, it offers maximum design flexibility. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 8μA of quiescent current without being affected by outside factors. Its superior flexibility is achieved by using 8 circuits.
CD74HC573M96 Features
20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC573 family
20 pin count
20 pins
2/6V power supplies
CD74HC573M96 Applications
There are a lot of Texas Instruments CD74HC573M96 Latches applications.
- Watches
- A/D converters
- Buffer register
- Shift register
- Serial Output Data Queuing
- Avionics
- Frequency dividing
- Hammer
- Lamp and Display (LED)
- Serial Output Register
