CD74HC574M96G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 7.8mA |
| Number of Bits | 8 |
| Clock Frequency | 60MHz |
| Propagation Delay | 165 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.8mA 7.8mA |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC574M96G4 Overview
As a result, it is packaged as 20-SOIC (0.295, 7.50mm Width). It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~6V. The operating temperature is -55°C~125°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 60MHzshould be the maximum output frequency. The element count is 1 . A total of 20 terminations have been made. Members of the 74HC574family make up this object. A voltage of 4.5V provides power to the D latch. This JK flip flop has a 10pFfarad input capacitance. A device of this type belongs to the family of HC/UH. Surface Mount mounts this electronic component. A total of 20pins are provided on this board. It has a clock edge trigger type of Positive Edge. It is included in Bus Driver/Transceiver. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. There are 2/6V power supplies attached to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The output current of 7.8mA makes it feature maximum design flexibility. There are 3 output lines on it. There is 8μA quiescent current consumption by it.
CD74HC574M96G4 Features
Tape & Reel (TR) package
74HC series
20 pins
8 Bits
2/6V power supplies
CD74HC574M96G4 Applications
There are a lot of Texas Instruments CD74HC574M96G4 Flip Flops applications.
- Test & Measurement
- Instrumentation
- Asynchronous counter
- EMI reduction circuitry
- Buffered Clock
- Event Detectors
- Count Modes
- ESD performance
- Load Control
- Memory
