CD74HC574ME4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Frequency | 60MHz |
| Pin Count | 20 |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 7.8mA |
| Propagation Delay | 250 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -7.8mA |
| Low Level Output Current | 7.8mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC574ME4 Overview
The package is in the form of SOIC. It is contained within the Rail/Tubepackage. There are 1 elements in it. There are 20 terminations,The power source is powered by 4.5V. It belongs to the family of electronic devices known as HC/UH. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in Bus Driver/Transceiver. A D flip flop with 2embedded ports is available. It operates with 3 output lines. 8μAquiescent current consumed. A -7.8mAvalue is set for the high level output current. It is set to 7.8mAfor the low level output current. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature is higher than -55°C. Initially, it requires a voltage of 2V as the minimum supply voltage. 6Vis its maximum supply voltage. This can be achieved at a frequency of 60MHz. It uses a logic IC with a BUS DRIVER value. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 20. It offers maximum design flexibility with its output current of 7.8mA.
CD74HC574ME4 Features
Rail/Tube package
20 pins
1 Functions
20 pin count
CD74HC574ME4 Applications
There are a lot of Texas Instruments CD74HC574ME4 Flip Flops applications.
- Load Control
- Shift Registers
- Bus hold
- Single Down Count-Control Line
- Communications
- Common Clocks
- Count Modes
- Test & Measurement
- Patented noise
- Matched Rise and Fall
