CD74HC73EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | JK Type |
| Voltage - Supply | 2V~6V |
| Base Part Number | 74HC73 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Clock Frequency | 60MHz |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74HC73EG4 Overview
14-DIP (0.300, 7.62mm)is the way it is packaged. Package Tubeembeds it. There is a Differentialoutput configured with it. It is configured with the trigger Negative Edge. Through Holeis in the way of this electric part. The JK flip flop operates at 2V~6Vvolts. -55°C~125°C TAis the operating temperature. This logic flip flop is classified as type JK Type. It belongs to the 74HCseries of FPGAs. It should not exceed 60MHzin its output frequency. In total, there are 2 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. This D latch belongs to the family of 74HC73. There is 10pF input capacitance for this T flip flop.
CD74HC73EG4 Features
Tube package
74HC series
CD74HC73EG4 Applications
There are a lot of Texas Instruments CD74HC73EG4 Flip Flops applications.
- Load Control
- Communications
- Single Down Count-Control Line
- Counters
- Storage registers
- Supports Live Insertion
- CMOS Process
- Data storage
- Divide a clock signal by 2 or 4
- Latch
