Parameters |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
14 |
Weight |
129.387224mg |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
14 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Additional Feature |
MASTER SLAVE OPERATION |
Subcategory |
FF/Latches |
Packing Method |
TUBE |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Frequency |
60MHz |
Pin Count |
14 |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Temperature Grade |
MILITARY |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Current - Output |
5.2mA |
Number of Bits |
2 |
Propagation Delay |
160 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
13 ns |
Family |
HC/UH |
Logic Function |
JK-Type |
Logic IC Type |
J-K FLIP-FLOP |
Max I(ol) |
0.004 A |
High Level Output Current |
-5.2mA |
Low Level Output Current |
5.2mA |
Number of Output Lines |
1 |
Clock Edge Trigger Type |
Negative Edge |
Height |
1.58mm |
Length |
8.65mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
CD74HC73MG4 Overview
The item is packaged in SOICcases. A total of 2elements are contained within it. 14terminations have occurred. An input voltage of 4.5Vpowers the D latch. The electronic device belongs to the HC/UHfamily. This electronic part is mounted in the way of Surface Mount. This board has 14 pins. Its clock edge trigger type is Negative Edge. This part is included in FF/Latches. It is designed with 2bits. Considering the reliability of this T flip flop, it is well suited for TUBE. In order to operate, the chip has 1 output lines. It consumes 4μA current. Additionally, you may refer to the D latch's additional MASTER SLAVE OPERATION. It is set to -5.2mAfor the high level output current. The low level output current is set to 5.2mA. Ideally, the operating temperature should be below 125°C. Ideally, the operating temperature should be higher than -55°C. It operates with the minimal supply voltage of 2V. It supports the maximal supply voltage of 6V. We are able to achieve a frequency of 60MHz. It uses a logic IC with a J-K FLIP-FLOP value. It is equipped with 2 functions . 14pins are provided on the D latch. Its output current of 5.2mA allows for maximum design flexibility.
CD74HC73MG4 Features
14 pins
2 Bits
2 Functions
14 pin count
CD74HC73MG4 Applications
There are a lot of Texas Instruments CD74HC73MG4 Flip Flops applications.
- Storage registers
- Synchronous counter
- Shift registers
- Reduced system switching noise
- ESCC
- Memory
- Clock pulse
- Asynchronous counter
- Circuit Design
- Registers