CD74HC74M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 50MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 53 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC74M Overview
14-SOIC (0.154, 3.90mm Width)is the way it is packaged. It is included in the package Tube. The output it is configured with uses Differential. It is configured with the trigger Positive Edge. There is an electric part mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. In the operating environment, the temperature is -55°C~125°C TA. This electronic flip flop is of type D-Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 50MHz Hz. It has been determined that there have been 14 terminations. JK flip flop belongs to 74HC74 family. It is powered from a supply voltage of 4.5V. JK flip flop input capacitance is 10pF farads. This D flip flop belongs to the family of HC/UH. Surface Mount mounts this electronic component. Basically, it is designed with a set of 14 pins. This device has the clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be kept above 2V. Its output current of 5.2mAallows for maximum design flexibility. There are 1 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 4μA of quiescent current without being affected by external factors. There are 2 channels available.
CD74HC74M Features
Tube package
74HC series
14 pins
CD74HC74M Applications
There are a lot of Texas Instruments CD74HC74M Flip Flops applications.
- ATE
- Count Modes
- Individual Asynchronous Resets
- Clock pulse
- Data transfer
- Parallel data storage
- Load Control
- Buffer registers
- Instrumentation
- ESD protection
