CD74HC74M96E4
| Parameters | |
|---|---|
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 1 |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Prop. Delay@Nom-Sup | 53 ns |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latch |
CD74HC74M96E4 Overview
It is embeded in SOIC case. There is an embedded version in the package Tape & Reel (TR). There are 2 elements in it. A total of 14 terminations have been made. A voltage of 4.5V provides power to the D latch. It belongs to the family of electronic devices known as HC/UH. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device has the clock edge trigger type of Positive Edge. It is included in FF/Latch. There are 1bits in its design. In light of its reliable performance, this T flip flop is well suited for TR. This input has 1lines in it. It consumes 4μA of quiescent current without being affected by external factors. -5.2mAis set as the high level output current. In the low level output current setting, 5.2mAis used. There should be a temperature below 125°Cduring operation. If the operating temperature is higher than -55°C, the system should operate properly. The minimum voltage required for operation is 2V. In this case, it supports a maximum supply voltage of 6V. This frequency can be achieved at 50MHz. The logic IC it adopts is D FLIP-FLOP. As a result, it is equipped with 2 functions . A total of 14 pins are present on this device. The output current of 5.2mA makes it feature maximum design flexibility.
CD74HC74M96E4 Features
Tape & Reel (TR) package
14 pins
1 Bits
2 Functions
14 pin count
CD74HC74M96E4 Applications
There are a lot of Texas Instruments CD74HC74M96E4 Flip Flops applications.
- Load Control
- Patented noise
- Pattern generators
- Memory
- Balanced Propagation Delays
- Supports Live Insertion
- High Performance Logic for test systems
- Bus hold
- ESCC
- Counters
