CD74HC74M96G4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 1 |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
CD74HC74M96G4 Overview
The package is in the form of SOIC. There are 2 elements in it. 14terminations have occurred. A voltage of 4.5V is used to power it. The electronic device belongs to the HC/UHfamily. A part of the electronic system is mounted in the way of Surface Mount. A total of 14pins are provided on this board. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. 1bits are used in its design. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. There are 1 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. It consumes 4μA of quiescent current without being affected by external factors. It is set to -5.2mAfor the high level output current. 5.2mAis set as the low level output current. Temperatures below 125°Care ideal for operating. Ideally, the operating temperature should be greater than -55°C. A minimum supply voltage of 2V is required for these RS flip flops to operate. It supports the maximal supply voltage of 6V. The frequency can be set to 50MHz. It adopts a logic IC of type D FLIP-FLOP. Currently, it is equipped with 2 functions . 14pins are available on this JK flip flop. With an output current of 5.2mA, this flip flop offers maximum design flexibility.
CD74HC74M96G4 Features
14 pins
1 Bits
2 Functions
14 pin count
CD74HC74M96G4 Applications
There are a lot of Texas Instruments CD74HC74M96G4 Flip Flops applications.
- Storage Registers
- Dynamic threshold performance
- Modulo – n – counter
- Consumer
- Frequency Divider circuits
- QML qualified product
- ESCC
- Divide a clock signal by 2 or 4
- Instrumentation
- Counters
