CD74HC74MTE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 50MHz |
| Pin Count | 14 |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Load Capacitance | 50pF |
| Current - Output | 5.2mA |
| Number of Bits | 1 |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Prop. Delay@Nom-Sup | 53 ns |
| High Level Output Current | -5.2mA |
| Low Level Output Current | 5.2mA |
| Power Supply Current-Max (ICC) | 0.04mA |
| Number of Input Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HC74MTE4 Overview
The package is in the form of SOIC. As part of the package Tape & Reel (TR), it is embedded. In total, it contains 2 elements. 14terminations have occurred. A voltage of 4.5V is used to power it. It belongs to the family of electronic devices known as HC/UH. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latch. The flip flop is designed with 1bits. This D flip flop is well suited for TR based on its reliable performance. Currently, there are 1 input lines present. Quiescent current is consumed by the D latch in the amount of 4μA. In this case, the high level output current is set to -5.2mA. It is set to 5.2mAfor the low level output current. Ideally, the operating temperature should be lower than 125°C. Ideally, the operating temperature should be higher than -55°C. The RS flip flop is designed to operate with a minimal supply voltage of 2VV. 6Vis its maximum supply voltage. The frequency that can be achieved is 50MHz. The logic IC it uses is D FLIP-FLOP. It is equipped with 2 Functions . The D latch is equipped with 14 pins. It features maximum design flexibility due to the 5.2mA output current.
CD74HC74MTE4 Features
Tape & Reel (TR) package
14 pins
1 Bits
2 Functions
14 pin count
CD74HC74MTE4 Applications
There are a lot of Texas Instruments CD74HC74MTE4 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Bus hold
- Frequency Divider circuits
- Count Modes
- Asynchronous counter
- Convert a momentary switch to a toggle switch
- Counters
- ESD protection
- Consumer
- Clock pulse
