CD74HC75E
| Parameters | |
|---|---|
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC75 |
| Pin Count | 16 |
| Output Type | Differential |
| Number of Elements | 2 |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Number of Output Lines | 4 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
CD74HC75E Overview
A package called 16-DIP (0.300, 7.62mm) contains it. Tube is the way in which it is packaged. It uses Differential as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Through Hole. There is no supply voltage for this device. During operation, the temperature is set at -55°C~125°C. 74HC is the series number of this FPGA. The design of this electronic part contains 4 bits. This device is designed with 16 terminations. As a member of the 74HC75 family, it falls under that category. The device is operated when the supply voltage is set to 4.5V. 16 pins are included. This electronic device is categorized as a HC/UH electronic device. In addition, it is designed with a pin number of 16. Mounting this electronic component follows the Through Hole method. FF/Latches is the subcategory of this part. It reaches a maximum supply voltage (Vsup) of 6V. It is recommended to have a higher supply voltage (Vsup) than 2V. The output current of 5.2mA makes it feature maximum design flexibility. Input lines are generated as binary equivalents by 4 output lines. It consumes 4μA current from its quiescent state without being affected by external factors at all. A total of 2 elements make up this object.
CD74HC75E Features
16-DIP (0.300, 7.62mm) package
74HC series
4 Bits
74HC75 family
16 pin count
16 pins
2 elements
CD74HC75E Applications
There are a lot of Texas Instruments CD74HC75E Latches applications.
- Parallel Input
- Address register
- Pattern generators
- Counters
- Serial Input
- Motor Drives
- Meter applications
- Phase comparator
- Decade counting 7-segment decimal display
- Synchronous frequency dividers
