CD74HC75M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC75 |
| Pin Count | 16 |
| Output Type | Differential |
| Number of Elements | 2 |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Number of Output Lines | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC75M96 Overview
In the 16-SOIC (0.154, 3.90mm Width) package, it can be found as an embedded module. This package has the format of Tape & Reel (TR). There is a Differential output configured. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 2V~6V. It operates at -55°C~125°C degrees Celsius. 74HC is the series number of this FPGA. The design of this electronic part is based on 4 bits. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is no doubt that it belongs to the family 74HC75. In order to function, the supply voltage should be set to 4.5V. It has 16 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of HC/UH. In addition, it is designed with a pin number of 16. The electronic part is mounted using the Surface Mount method. There is a subcategory of FF/Latches for this part. 6V is the maximum supply voltage (Vsup). A voltage greater than 2V must be supplied as a power supply (Vsup). Based on its reliable performance, this device is appropriate for TR. With 5.2mA, maximum design flexibility is ensured. It follows that 4 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 4μA of quiescent current. 2 elements are present in it.
CD74HC75M96 Features
16-SOIC (0.154, 3.90mm Width) package
74HC series
4 Bits
74HC75 family
16 pin count
16 pins
2 elements
CD74HC75M96 Applications
There are a lot of Texas Instruments CD74HC75M96 Latches applications.
- Hammer
- Up-Down Johnson
- Multistage ripple counting
- Motor Drives
- Counter timers
- Shift register
- Automotive Cluster
- Parallel Input
- Shift left register
- Network Switches
