CD74HC75MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC75 |
| Pin Count | 16 |
| Output Type | Differential |
| Number of Elements | 2 |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Number of Output Lines | 4 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC75MT Overview
In the 16-SOIC (0.154, 3.90mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. In its configuration, Differential is used as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. This electronic part is mounted in the way of Surface Mount. The voltage supply is 2V~6V. A temperature of -55°C~125°C is set as the operating temperature. The 74HC series is associated with this FPGA. With this electronic part, there are 4 bits. In this device, there are 16 terminations that have been designed. As a member of the 74HC75 family, it falls under that category. The device works with a voltage of 4.5V for its supply voltage. It is equipped with 16 pin count. It is a member of the HC/UH family of electronic devices. With the design of the board, there are only 16 pins. It is mounted according to the Surface Mount method. It belongs to the subcategory of FF/Latches. When Vsup reaches 6V, the maximal supply voltage is reached. A supply voltage (Vsup) greater than 2V is required. Considering the reliability of this device, it would be a good candidate for TR. With 5.2mA, maximum design flexibility is ensured. It follows that 4 output lines are generated from the binary equivalent of the input line. It consumes 4μA of quiescent current without being affected by external factors. A total of 2 elements make up this object.
CD74HC75MT Features
16-SOIC (0.154, 3.90mm Width) package
74HC series
4 Bits
74HC75 family
16 pin count
16 pins
2 elements
CD74HC75MT Applications
There are a lot of Texas Instruments CD74HC75MT Latches applications.
- Double bus register system
- Automotive Body Electronics
- Pattern generators
- General-Purpose Register
- OC-48 communication systems
- TV Set-top Boxes
- Pattern Generators
- Shift right with parallel loading
- Parallel Output
- Avionics
