Parameters |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Logic IC Type |
D LATCH |
Prop. Delay@Nom-Sup |
33 ns |
Trigger Type |
HIGH LEVEL |
High Level Output Current |
-5.2mA |
Low Level Output Current |
5.2mA |
Number of Input Lines |
4 |
Length |
5mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Contact Plating |
Gold |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
16 |
Weight |
61.887009mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-55°C |
Subcategory |
FF/Latch |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.65mm |
Pin Count |
16 |
Number of Elements |
2 |
Polarity |
Non-Inverting |
Temperature Grade |
MILITARY |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Load Capacitance |
50pF |
Current - Output |
5.2mA |
Number of Bits |
2 |
Propagation Delay |
22 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
10 ns |
CD74HC75PWG4 Overview
The package in which it is embedded is named TSSOP. Packaged in the way of Rail/Tube. The electronic part in this image has 2 bits. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The device works with a voltage of 4.5V for its supply voltage. The 16 pind are equipped with it. HC/UH is the family of this electronic device. The pin configuration of the device is 16. The electronic part is mounted using the Surface Mount method. FF/Latch is the subcategory of this part. In the circuit, there are 4 input lines that are constituted by an electronic circuit. Without external influences, it consumes 4μA quiescent current. A total of 2 elements are contained in it. There is 5.2mA low level output current set. -5.2mA is set as the high level output current. It is recommended to work at a temperature lower than 125°C. Temperatures above -55°C should be used. 6V is the maximum voltage it supports. In order for the machine to operate, the supply voltage must be 2V. It uses a logic IC of type D LATCH. Its 5.2mA output current allows for maximum design flexibility.
CD74HC75PWG4 Features
TSSOP package
2 Bits
16 pin count
16 pins
2 elements
CD74HC75PWG4 Applications
There are a lot of Texas Instruments CD74HC75PWG4 Latches applications.
- Programmable binary
- Parallel Output
- Motor Drives
- Counters
- A/D converters
- Lamp and Display (LED)
- Watches
- Buffer register
- Data acquisition
- Hammer Device Information