CD74HC75PWR
| Parameters | |
|---|---|
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Number of Output Lines | 4 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC75 |
| Pin Count | 16 |
| Output Type | Differential |
| Number of Elements | 2 |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
CD74HC75PWR Overview
In the package 16-TSSOP (0.173, 4.40mm Width), it can be found. As a result, it has a packaging of Tape & Reel (TR). It uses Differential as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. It operates at a voltage of 2V~6V. There is a temperature of -55°C~125°C at which the system operates. There are a number of FPGAs in this series, including this one. The electronic part in this image has 4 bits. This device has 16 terminations. The family it belongs to is 74HC75. In order to function, the supply voltage should be set to 4.5V. 16 pins are available on it. In the world of electronics, this electronic device belongs to the family of HC/UH. In addition, it is designed with a pin number of 16. Electronic parts are mounted using the Surface Mount method. The part is in the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. (Vsup) should be greater than 2V. Considering the reliability of this device, it would be a good candidate for TR. Its 5.2mA output current allows for maximum design flexibility. There are 4 output lines that correspond to the binary equivalents of the input line. Without external influences, it consumes 4μA quiescent current. This element consists of 2.
CD74HC75PWR Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
4 Bits
74HC75 family
16 pin count
16 pins
2 elements
CD74HC75PWR Applications
There are a lot of Texas Instruments CD74HC75PWR Latches applications.
- BCD counting
- Audio and video switching
- Multistage ripple counting
- Phase comparator
- Serial Input
- Sample and hold register
- Parallel Input
- Avionics
- Frequency dividing
- PCs and Notebooks
