Parameters |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
61.887009mg |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Series |
74HC |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
2V~6V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74HC75 |
Pin Count |
16 |
Qualification Status |
Not Qualified |
Output Type |
Differential |
Number of Elements |
2 |
Circuit |
2:2 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
6V |
Supply Voltage-Min (Vsup) |
2V |
Load Capacitance |
50pF |
Output Current |
5.2mA |
Number of Bits |
4 |
Propagation Delay |
22 ns |
Quiescent Current |
4μA |
Turn On Delay Time |
10 ns |
Family |
HC/UH |
Logic Function |
D-Type, Latch |
Current - Output High, Low |
5.2mA 5.2mA |
Logic Type |
D-Type Transparent Latch |
Trigger Type |
HIGH LEVEL |
Schmitt Trigger |
No |
Number of Output Lines |
4 |
Height |
1.2mm |
Length |
5mm |
Width |
4.4mm |
CD74HC75PWRG4 Overview
It is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. The package is in the form of Tape & Reel (TR). It is configured with an output of Differential. A D-Type Transparent Latch logic type is used in this electrical device. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~6V, it operates. It operates at -55°C~125°C degrees Celsius. In the 74HC series, this FPGA is located. The design of this electronic part contains 4 bits. This device is designed with 16 terminations. It is a member of the 74HC75 family. It operates with a supply voltage of 4.5V. With 16 pins, it is equipped. It is part of the family of electronic devices called HC/UH. 16 pins are used in its design. The electronic part is mounted using the Surface Mount method. It belongs to the subcategory of FF/Latches. 6V is the maximum voltage (Vsup) that can be supplied. The supply voltage (Vsup) should be greater than 2V. Based on its reliable performance, this device is suitable for TR. Its output current of 5.2mA ensures maximum design flexibility. There are 4 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 4μA of quiescent current without being affected by external factors. This object is composed of 2 elements.
CD74HC75PWRG4 Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
4 Bits
74HC75 family
16 pin count
16 pins
2 elements
CD74HC75PWRG4 Applications
There are a lot of Texas Instruments CD74HC75PWRG4 Latches applications.
- Shift left register
- Parallel-to-Serial Data Conversion
- General-Purpose Register
- Parallel Output
- PCs and Notebooks
- A/D converters
- Up/down difference counting
- Shift register
- A/D and D/A conversion
- Serial Output Register