CD74HC75PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Base Part Number | 74HC75 |
| Pin Count | 16 |
| Output Type | Differential |
| Number of Elements | 2 |
| Circuit | 2:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Number of Bits | 4 |
| Propagation Delay | 195 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 10 ns |
| Family | HC/UH |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Trigger Type | HIGH LEVEL |
| Schmitt Trigger | No |
| Number of Output Lines | 4 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC75PWT Overview
In the 16-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A Tape & Reel (TR) package is used to package it. It uses Differential as its output configuration. D-Type Transparent Latch is the logic type of this electrical device. According to Surface Mount, this electronic part is mounted. The voltage supply is 2V~6V. There is -55°C~125°C operating temperature. In the 74HC series, this FPGA is located. 4 Bits are used in the design of this electronic part. This device is designed with 16 terminations. This type belongs to the 74HC75 family. With the supply voltage set at 4.5V, it is able to operate. 16 pins are provided. In the world of electronics, this electronic device belongs to the family of HC/UH. There are 16 pins on it. The electronic part is mounted using the Surface Mount method. It belongs to the subcategory of FF/Latches. Vsup reaches 6V as the maximum supply voltage. It is recommended to have a higher supply voltage (Vsup) than 2V. Based on its reliable performance, this device is appropriate for TR. The output current of 5.2mA makes it feature maximum design flexibility. 4 output lines generate the binary equivalent of the input lines. As far as external factors are concerned, it consumes 4μA of quiescent current without getting affected by them. This element consists of 2.
CD74HC75PWT Features
16-TSSOP (0.173, 4.40mm Width) package
74HC series
4 Bits
74HC75 family
16 pin count
16 pins
2 elements
CD74HC75PWT Applications
There are a lot of Texas Instruments CD74HC75PWT Latches applications.
- Ring counter
- Relay replacement
- OC-48 communication systems
- Accumulator Registers
- Registers
- Parallel Output
- Shift left register
- Counter control
- Sample and hold register
- Multistage ripple counting
