CD74HC93E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Base Part Number | 74HC93 |
| Pin Count | 14 |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 370 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 370 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 52 ns |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HC93E Overview
This device is supplied in the 14-DIP (0.300, 7.62mm) package. There are 14 terminations used for its configuration. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. There are wires connecting 1elements. All component pins are equal to 14. Packaging is based on Tube. A circuit is connected to other components by 14pins. The way of Through Hole is used to mount it. In this case, it belongs to the family of [0]. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. It is adopted that the logic type is [0]. Ideally, the operating temperature should be set to -55°C~125°C. The mounting type is Through Hole. Providing a supply voltage of 2V~6Vallows it to operate more reliably. There are 4bits stored in each element of the array. Further related parts can be found under its base part number 74HC93. In this case, there is 2/6V voltage coming from the voltage source. In the case of the supply voltage (Vsup), it can be as low as 2V. The frequency of the device is 35MHz. The maximum supply voltage (Vsup) is up to 6V. In the state of [0], it consumes quiescent current.
CD74HC93E Features
Embedded in the 14-DIP (0.300, 7.62mm) package
4 bits per element
Frequency of 35MHz
CD74HC93E Applications
There are a lot of Texas Instruments CD74HC93E Counters & Dividers applications.
- Counter control/timers
- MULTIPLICATION
- Timing applications
- Time Out Timer for Consumer-Application Industrial Controls
- Decade counter/decimal decode display (CD4017B）
- LINEARIZATION
- Up Counters
- Binary counter/decoder
- Frequency division
- Signal gating
