CD74HC93MT
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 370 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Max I(ol) | 0.0052 A |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 52 ns |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Negative Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 129.387224mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Frequency | 35MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC93 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
CD74HC93MT Overview
14-SOIC (0.154, 3.90mm Width)is a package in which this device is packaged. There are 14terminations used for configuring it. Having a supply voltage of 4.5V enables to operate in a fully flexible manner. In wires, 1elements are connected. In all, there are 14 pins on each component. Packaging is based on Tape & Reel (TR). A circuit is connected to other components by 14pins. To mount it, use the method of [0]. Initially, it appears to belong to the HC/UH family. As a member of 74HC series, it is well suited for various applications. Binary Counteris used as the logic type. Ideally, the operating temperature should be set to -55°C~125°C. There is a mounting type of Surface Mounton this device. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. Each element in the array stores 4 bits. It is possible for the result to be yesin Pbfree code. There are more related parts under the 74HC93base part number. In order to pack the product, TRis employed. In this case, 2/6Vvoltage is generated by the voltage source. Supply voltages can be as low as 2V volts (Vsup). The frequency of the system is 35MHz. Up to a maximum voltage of 6Vcan be supplied (Vsup). As long as 8μAis maintained, it consumes quiescent current.
CD74HC93MT Features
Embedded in the 14-SOIC (0.154, 3.90mm Width) package
4 bits per element
Frequency of 35MHz
CD74HC93MT Applications
There are a lot of Texas Instruments CD74HC93MT Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- SQUARE ROOT
- Frequency dividers
- Time-delay circuits
- Time delay circuits
- counting/frequency sy nthesizers-BCD output
- Timing applications
- VHF, UHF, FM, AM, etc.
