CD74HCT107E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT107 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 56MHz |
| Propagation Delay | 43 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 43ns @ 4.5V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Negative Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT107E Overview
14-DIP (0.300, 7.62mm)is the packaging method. It is contained within the Tubepackage. Differentialis the output configured for it. The trigger configured with it uses Negative Edge. There is an electronic component mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. In the operating environment, the temperature is -55°C~125°C TA. JK Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74HCT series. You should not exceed 56MHzin its output frequency. There have been 14 terminations. The object belongs to the 74HCT107 family. Power is provided by a 5V supply. Its input capacitance is 10pF farads. This D flip flop belongs to the family of HCT. Through Hole mounts this electronic component. 14pins are included in its design. This device exhibits a clock edge trigger type of Negative Edge. The RS flip flops belongs to FF/Latches base part number. The D latch operates on 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. With a current output of 4mA , it offers maximum design flexibility. Quiescent current is consumed by the D latch in the amount of 4μA. There are 2 channels available.
CD74HCT107E Features
Tube package
74HCT series
14 pins
5V power supplies
CD74HCT107E Applications
There are a lot of Texas Instruments CD74HCT107E Flip Flops applications.
- Buffered Clock
- Communications
- Frequency division
- Shift registers
- Balanced 24 mA output drivers
- 2 – Bit synchronous counter
- Data storage
- Count Modes
- Balanced Propagation Delays
- Reduced system switching noise
