CD74HCT109E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 54MHz |
| Propagation Delay | 68 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT109E Overview
The flip flop is packaged in 16-DIP (0.300, 7.62mm). It is included in the package Tube. Currently, the output is configured to use Differential. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at -55°C~125°C TA. This electronic flip flop is of type JK Type. JK flip flop is a part of the 74HCTseries of FPGAs. You should not exceed 54MHzin its output frequency. A total of 16 terminations have been made. You can search similar parts based on 74HCT109. The D flip flop is powered by a voltage of 5V . There is 10pF input capacitance for this T flip flop. This D flip flop belongs to the family of HCT. Electronic part Through Holeis mounted in the way. The electronic flip flop is designed with pins 16. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. Its superior flexibility is attributed to its use of 2 circuits. A power supply of 5Vis required to operate it. For high efficiency, the supply voltage should be set to 5V. It offers maximum design flexibility with its output current of 4mA. This D latch consumes 4μA quiescent current at all.
CD74HCT109E Features
Tube package
74HCT series
16 pins
5V power supplies
CD74HCT109E Applications
There are a lot of Texas Instruments CD74HCT109E Flip Flops applications.
- Safety Clamp
- Convert a momentary switch to a toggle switch
- Latch
- Consumer
- Modulo – n – counter
- Automotive
- Divide a clock signal by 2 or 4
- Computers
- Data Synchronizers
- ESCC
