CD74HCT109M
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 54MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 50 ns |
| fmax-Min | 54 MHz |
| RoHS Status | Non-RoHS Compliant |
CD74HCT109M Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. You can find it in the Tubepackage. The output it is configured with uses Differential. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of -55°C~125°C TAis considered to be the operating temperature. JK Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74HCT series. Its output frequency should not exceed 54MHz. The list contains 2 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. A total of 16 terminations have been made. It is powered by a voltage of 5V . The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of HCT. Vsup reaches 5.5V, the maximal supply voltage. The supply voltage (Vsup) should be kept above 4.5V for normal operation.
CD74HCT109M Features
Tube package
74HCT series
CD74HCT109M Applications
There are a lot of Rochester Electronics, LLC CD74HCT109M Flip Flops applications.
- Test & Measurement
- Circuit Design
- Latch-up performance
- Data Synchronizers
- Frequency Dividers
- Consumer
- Frequency division
- Shift registers
- Single Down Count-Control Line
- High Performance Logic for test systems
