CD74HCT109M
| Parameters | |
|---|---|
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 54MHz |
| Propagation Delay | 40 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
CD74HCT109M Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). You can find it in the Tubepackage. This output is configured with Differential. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -55°C~125°C TAis considered to be the operating temperature. This D latch has the type JK Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. Its output frequency should not exceed 54MHz. Terminations are 16. It is a member of the 74HCT109 family. A voltage of 5V provides power to the D latch. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. To achieve this superior flexibility, 2 circuits are used. An electrical current of 5V volts is applied to it. If high efficiency is desired, the supply voltage should be kept at 5V. Its output current of 4mAallows for maximum design flexibility. This D latch consumes 4μA quiescent current at all.
CD74HCT109M Features
Tube package
74HCT series
16 pins
5V power supplies
CD74HCT109M Applications
There are a lot of Texas Instruments CD74HCT109M Flip Flops applications.
- Instrumentation
- Supports Live Insertion
- Test & Measurement
- Guaranteed simultaneous switching noise level
- Data storage
- Automotive
- Power down protection
- Storage Registers
- Parallel data storage
- Computing
