CD74HCT109M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 54MHz |
| Propagation Delay | 40 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 0.04mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT109M96 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. The Tape & Reel (TR)package contains it. This output is configured with Differential. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. Currently, the operating temperature is -55°C~125°C TA. It belongs to the type JK Typeof flip flops. In terms of FPGAs, it belongs to the 74HCT series. A frequency of 54MHzshould not be exceeded by its output. Currently, there are 16 terminations. The object belongs to the 74HCT109 family. It is powered from a supply voltage of 5V. Its input capacitance is 10pFfarads. Electronic devices of this type belong to the HCTfamily. There is an electronic part that is mounted in the way of Surface Mount. With its 16pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. This RS flip flops is a part number FF/Latches. Its flexibility is enhanced by 2 circuits. This D flip flop is well suited for TR based on its reliable performance. A total of 5V power supplies are needed to run it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. As a result, it consumes 4μA of quiescent current without being affected by external factors.
CD74HCT109M96 Features
Tape & Reel (TR) package
74HCT series
16 pins
5V power supplies
CD74HCT109M96 Applications
There are a lot of Texas Instruments CD74HCT109M96 Flip Flops applications.
- Buffered Clock
- Instrumentation
- ESCC
- Single Down Count-Control Line
- Power down protection
- Automotive
- Memory
- Divide a clock signal by 2 or 4
- Pattern generators
- Clock pulse
