CD74HCT137M96
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT137 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 60 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 60 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.004 A |
| Voltage Supply Source | Single Supply |
| Input Conditioning | LATCHED |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT137M96 Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.In this case, it is packaged as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.The operating temperature of -55°C~125°C will not be susceptible to external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers in the 74HCT series are suitable for a wide range of applications.Among its basic configurations are 16 terminations.The base part number is 74HCT137, which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V voltage.Signal switch has 16 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.As a type of supply, Single is employed.A total of 16 pins are configured on this board.As you can see, it is mounted in the direction of Surface Mount.Among the family of HCT the logic switch is a member.Signal multiplexer contains 8 bits.mux switch's normal operation requires the power supply of 5V.The turn signal switch has 8 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.There are no external influences on this multiplexer ic, so it consumes 8μA current.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A multiplexer such as this has 3 inputs available.According to TR, the switches is packaged.In the mux switch configuration, there are 1 elements.
CD74HCT137M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CD74HCT137M96 Applications
There are a lot of Texas Instruments CD74HCT137M96 Signal Switches / Multiplexers / Decoders applications.
- Data distribution
- Relay
- LVDS
- A robotic vehicle with the metal detector
- Logic circuits
- PCIe
- A/D converters
- Data collection system
- Telephone network
- Communication system
