CD74HCT139ME4
| Parameters | |
|---|---|
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Independent Circuits | 1 |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | Decoder/Drivers |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 45 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 51 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
CD74HCT139ME4 Overview
Due to the lack of space on the board, digital switch is provided in the SOIC.It is designed with 16 terminations as part of its basic configuration.In this case, 5V is the voltage supplied to the multiplexer's system.This turn signal switch consists of 16 component pins.It is the end of conductors that is represented by GULL WING.In this case, the supply type is Single.The board is configured with 16 pins.It is mounted in the way of Surface Mount.The HCT family includes the logic switch.In the signal multiplexer, there are 4 bits available.There is a power supply provided for the mux switch's normal operation of 5V.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without the influence of external factors, it consumes 8μA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The signal switching is packaged by TUBE. Signal sources consist of output lines of 4.There is no problem with operating this signal switch at the maximum temperature of 125°C.Ideally, the temperature of the multiplexer should not exceed -55°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 4.5V.The configuration of the mux switch contains 2 elements.It uses IC OTHER DECODER/DRIVER for its logic.
CD74HCT139ME4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
CD74HCT139ME4 Applications
There are a lot of Texas Instruments CD74HCT139ME4 Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Data-routing applications
- Enabling different functions units in microprocessor instruction decoding
- To select different devices in microprocessor input
- Recording transmission
- Injectors
- Paper plants
- Microprocessor instruction decoding
- Code converters
- HDMI applications
