CD74HCT151M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Load Capacitance | 50pF |
| Power Dissipation | 21mW |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Family | HCT |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT151M Overview
For the purpose of saving board space, digital switch is included in the 16-SOIC (0.154, 3.90mm Width).Tube is the packaging method.digital switch ic uses the method of Surface Mount for mounting.For the analog part of the multiplexers, an IC Multiplexer is used.The operating temperature of -55°C~125°C will not be susceptible to external factors.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.In addition to being a member of the 74HCT series, these multiplexers have a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74HCT151, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.This turn signal switch has 16 component pins.Conductors terminate at GULL WING in this design.There is a supply type of Single employed as part of this supply.Currently, it is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HCT family.Signal multiplexer consists of 8 bits.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch has 1 outputs.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.The multiplexers have 2 input lines used to accept voltage levels.1 circuits are formed for the normal operation of the digitalswitch.
CD74HCT151M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
CD74HCT151M Applications
There are a lot of Texas Instruments CD74HCT151M Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- High-performance memory systems
- Decimal decoder
- Medium scale TV wall
- Arithmetic Logic Units
- Signal router
- Data demultiplexing
- Microprocessor instruction decoding
- Transmission from the computer system of a satellite
- A robotic vehicle with the metal detector
