CD74HCT151M96
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 38 ns |
| Family | HCT |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
CD74HCT151M96 Overview
Providing this information in the 16-SOIC (0.154, 3.90mm Width) enables digital switch board space to be saved.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.Multiplexers in the 74HCT series are suitable for a wide range of applications.The basic configuration of this system includes 16 terminations.There is a base part number 74HCT151 that can be used to locate signal switch's related components as well.For multiplexer's system, a voltage of 5V is supplied.In this turn signal switch, there are 16 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.Currently, it is configured with 16 pins.This unit is mounted in the way of Surface Mount.Among the family of HCT the logic switch is a member.As a result, signal multiplexer provides a total of 8 bits.For mux switch's normal operation, power supply 5V is provided.The turn signal switch has 1 outputs.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The switches package is packaged in accordance with the TR method.As a voltage level input, the multiplexers have 2 lines.
CD74HCT151M96 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
CD74HCT151M96 Applications
There are a lot of Texas Instruments CD74HCT151M96 Signal Switches / Multiplexers / Decoders applications.
- High-performance memory-decoding applications
- Night vision cameras
- Enabling block of memory depending on address in memory chips
- Data transfer
- Enabling different rows of memory depending on address in memory chips
- Data bus control
- Paper plants
- Data-routing applications
- Used to connect a single source to multiple destinations
- LVDS
