CD74HCT157M96E4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 25 ns |
| Family | HCT |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Number of Input Lines | 2 |
| Number of Output Lines | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT157M96E4 Overview
This is a relatively small item of digital switch that is included in the SOIC in order to save space on the board.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Among its basic configurations are 16 terminations.The multiplexer's system is powered by 5V voltage.In this turn signal switch, there are 16 component pins.GULL WING represents the end of conductors.In this case, the supply type is Single.This multiplexer ic has 16 pins configured.It is positioned in the direction of Surface Mount.There is a family of HCT members.In this signal multiplexer, there are 2 bits provided.During mux switch's normal operation, 5V is provided with a power supply.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The multiplexer provides 8 inputs.The switches package is packaged in a way which is consistent with TR.The multiplexers have 2 input lines used to accept voltage levels.There are 1 output lines on the signal source.A total of 4 transmission channels are available in the turn signal switch's circuit.It is acceptable for this signal switch to operate at the maximal temperature of 125°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -55°C.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.A minimum supply voltage of 4.5V is specified for the digital swith in accordance with its applicable specifications.
CD74HCT157M96E4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
1 output lines
CD74HCT157M96E4 Applications
There are a lot of Texas Instruments CD74HCT157M96E4 Signal Switches / Multiplexers / Decoders applications.
- Communication system
- Microprocessor input/output systems
- Solenoid cooling fan
- A/D converters
- Encrypted communications system
- High-performance memory-decoding applications
- Data distribution
- Arithmetic Logic Units
- LVDS
- PCIe
