CD74HCT157MT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT157 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 25 ns |
| Family | HCT |
| Number of Inputs | 8 |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT157MT Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HCT series, they can be used in a wide variety of applications.Among its basic features are 16 terminations.Its logic switch base part number is 74HCT157 which can also be used to find its logic switch related parts.The turn signal switch is supplied with a voltage of 5V volts.This turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.A configuration of 16 pins is used.The mounting point is Surface Mount.Among the family of HCT the logic switch is a member.There are 2 bits signal multiplexer provides.During mux switch's normal operation, 5V is provided with a power supply.In order for the turn signal switch to work, there are 1 outputs.Supply voltages of 5V can provide reliable performance of the multiplexers.This multiplexer has a total of 8 inputs.The switches package is packaged in accordance with the TR method.For transmission, there are 4 channels in the turn signal switch's circuit.
CD74HCT157MT Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
CD74HCT157MT Applications
There are a lot of Texas Instruments CD74HCT157MT Signal Switches / Multiplexers / Decoders applications.
- Automatic Monitoring systems
- Code converters
- Logic gates for other digital devices
- Make half adder
- Microprocessor input/output systems
- Enabling block of memory depending on address in memory chips
- To select different devices in microprocessor output
- Robotic vehicles
- A/D converters
- Data collection system
