CD74HCT158E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | Multiplexer |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT158 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Polarity | Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 28 ns |
| Logic Function | Multiplexer |
| Number of Inputs | 8 |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT158E Overview
Providing this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.It is packaged in the way of Tube.The mounting method digital switch ic uses is Through Hole.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4.5V~5.5V, designers have greater flexibility of digital controlled switch.These multiplexers are members of the 74HCT series, which provide extensive application potential.In addition, it also has a base part number of 74HCT158, which can be used to find related parts.In this case, Single is employed as the supply type.This multiplexer ic has 16 pins configured.It is mounted in the way of Through Hole.In the signal multiplexer, there are 2 bits available.The turn signal switch operates with 4 outputs.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The multiplexer provides 8 inputs.To accept voltage levels, the multiplexers have2 input lines.A signal source is provided by 1 output lines.A total of 4 transmission channels are available in the turn signal switch's circuit.The maximum temperature for this signal switch is 125°C.It is recommended that the minimal operating temperature of the multiplexer be maintained at -55°C.In compliance with the applicable device specification, the signal switches has a maximum supply voltage of 5.5V.A minimum supply voltage of 4.5V is required to operate the digital swith.Normally, the digitalswitch consists of 4 circuits.
CD74HCT158E Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
2 input lines
1 output lines
CD74HCT158E Applications
There are a lot of Texas Instruments CD74HCT158E Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Microprocessor instruction decoding
- Data demultiplexing
- Signal router
- Small scale TV wall
- Electronics industry
- Metal detectors
- Data collection system
- PCIe
- To select different devices in microprocessor output
