CD74HCT161MG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Base Part Number | 74HCT161 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Propagation Delay | 75 ns |
| Quiescent Current | 8μA |
| Reset | Asynchronous |
| Family | HCT |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Negative Edge |
| Power Supply Current-Max (ICC) | 0.08mA |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Negative Edge |
| Count Rate | 20MHz |
| Timing | Synchronous |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT161MG4 Overview
The device is packaged in the 16-SOIC (0.154, 3.90mm Width)type. Using 16terminations, it can be configured. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. The device has 1terminations. The total number of component pins is 16. It is packaged in a manner consistent with Tube. To connect the circuit's other components, there are 16pins. To mount it, use the method of [0]. The HCTfamily is derived from it. With its 74HCTseries designation, it can be used for a range of applications. Logic type Binary Counter is adopted. It is recommended that the operating temperature be set to -55°C~125°C. The mounting type is Surface Mount. When a supply voltage of 4.5V~5.5Vis provided, it can operate with greater reliability. There are 4 bits stored in each element of the array. Pbfree code may result in yes. It is important to note that in regards to this electronic device, TCO OUTPUTis an extremely significant feature. There are more related parts under the 74HCT161base part number. As a result of the voltage source, there is 5V voltage. In order for it to operate, it requires a supply voltage of 5V . The frequency of the device is 30MHz. In the quiescent state, it consumes 8μA current.
CD74HCT161MG4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
4 bits per element
TCO OUTPUT
Operating supply voltage of 5V
Frequency of 30MHz
CD74HCT161MG4 Applications
There are a lot of Texas Instruments CD74HCT161MG4 Counters & Dividers applications.
- Dual Up Counters
- Fixed and programmable counters greater than 10
- Time Out Timer for Consumer-Application Industrial Controls
- Frequency dividing circuits
- Programmable decade counters
- Divide-by-N counting
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Analog multiplexing and demultiplexing
- DIVISION
- Fixed or Programmable Frequency Division
