CD74HCT173E
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE; WITH DUAL OUTPUT ENABLE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Function | Master Reset |
| Qualification Status | COMMERCIAL |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Clock Frequency | 60MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 8μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 4 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Propagation Delay (tpd) | 60 ns |
| RoHS Status | Non-RoHS Compliant |
CD74HCT173E Overview
It is embeded in 16-DIP (0.300, 7.62mm) case. You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. Through Holemounts this electrical part. A 4.5V~5.5Vsupply voltage is required for it to operate. It is operating at a temperature of -55°C~125°C TA. D-Typedescribes this flip flop. JK flip flop belongs to the 74HCTseries of FPGAs. A frequency of 60MHzshould not be exceeded by its output. A total of 1elements are contained within it. Despite external influences, it consumes 8μAof quiescent current. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 10pF farads. It belongs to the family of electronic devices known as HCT. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. WITH HOLD MODE; WITH DUAL OUTPUT ENABLEis also one of its characteristics.
CD74HCT173E Features
Tube package
74HCT series
CD74HCT173E Applications
There are a lot of Rochester Electronics, LLC CD74HCT173E Flip Flops applications.
- Shift registers
- Convert a momentary switch to a toggle switch
- Buffered Clock
- Communications
- Control circuits
- Balanced Propagation Delays
- Differential Individual
- Reduced system switching noise
- QML qualified product
- Circuit Design
