CD74HCT173M96
| Parameters | |
|---|---|
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 60MHz |
| Propagation Delay | 40 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT173 |
CD74HCT173M96 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.5V~5.5V. In the operating environment, the temperature is -55°C~125°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. Its output frequency should not exceed 60MHz Hz. A total of 1 elements are present. Terminations are 16. The object belongs to the 74HCT173 family. Power is provided by a 5V supply. A JK flip flop with a 10pFfarad input capacitance is used here. An electronic device belonging to the family HCTcan be found here. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. It is designed with a number of bits of 4. The superior flexibility is achieved through the use of 4 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. It runs on 5Vvolts of power. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is designed with 3 output lines. There is a consumption of 8μAof quiescent current from it. Additionally, you may refer to the D latch's additional WITH DUAL OUTPUT ENABLE.
CD74HCT173M96 Features
Tape & Reel (TR) package
74HCT series
16 pins
4 Bits
5V power supplies
CD74HCT173M96 Applications
There are a lot of Texas Instruments CD74HCT173M96 Flip Flops applications.
- Frequency Dividers
- Frequency Divider circuits
- Data storage
- Instrumentation
- Test & Measurement
- Digital electronics systems
- Supports Live Insertion
- Dynamic threshold performance
- Parallel data storage
- Shift registers
