CD74HCT174E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74HCT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 6 |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 6 |
| Clock Frequency | 25MHz |
| Propagation Delay | 66 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT174E Overview
The flip flop is packaged in 16-DIP (0.300, 7.62mm). D flip flop is included in the Tubepackage. There is a Non-Invertedoutput configured with it. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 25MHz. There are 1 elements in it. 16terminations have occurred. The object belongs to the 74HCT174 family. Power is supplied from a voltage of 5V volts. A 10pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HCT. This electronic part is mounted in the way of Through Hole. Basically, it is designed with a set of 16 pins. This device exhibits a clock edge trigger type of Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 6bits has been designed. Using 7 circuits, it is highly flexible. A total of 5V power supplies are needed to run it. High efficiency requires the supply voltage to be maintained at 5V. Its output current of 4mAallows for maximum design flexibility. There is a consumption of 8μAof quiescent current from it. Furthermore, it has DUMMY VALas a characteristic. A total of 6 channels are available.
CD74HCT174E Features
Tube package
74HCT series
16 pins
6 Bits
5V power supplies
CD74HCT174E Applications
There are a lot of Texas Instruments CD74HCT174E Flip Flops applications.
- Data Synchronizers
- Asynchronous counter
- Clock pulse
- Instrumentation
- Automotive
- Single Up Count-Control Line
- Bounce elimination switch
- Convert a momentary switch to a toggle switch
- Synchronous counter
- Memory
