CD74HCT174EG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 25MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| RoHS Status | ROHS3 Compliant |
CD74HCT174EG4 Overview
The flip flop is packaged in 16-DIP (0.300, 7.62mm). You can find it in the Tubepackage. This output is configured with Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. There should be no greater frequency than 25MHzon its output. D latch consists of 1 elements. T flip flop consumes 8μA quiescent energy. The 74HCT174 family contains this object. A 10pFfarad input capacitance is provided by this T flip flop.
CD74HCT174EG4 Features
Tube package
74HCT series
CD74HCT174EG4 Applications
There are a lot of Texas Instruments CD74HCT174EG4 Flip Flops applications.
- Storage registers
- Counters
- Asynchronous counter
- Data storage
- Load Control
- Synchronous counter
- Control circuits
- Event Detectors
- Set-reset capability
- CMOS Process
