CD74HCT174M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | DUMMY VAL |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 6 |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Number of Bits | 6 |
| Clock Frequency | 25MHz |
| Propagation Delay | 40 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 17 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT174M Overview
The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. As part of the package Tube, it is embedded. In the configuration, Non-Invertedis used as the output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is at -55°C~125°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74HCT series. It should not exceed 25MHzin terms of its output frequency. The element count is 1 . Currently, there are 16 terminations. This D latch belongs to the family of 74HCT174. It is powered from a supply voltage of 5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as HCT. Surface Mount mounts this electronic component. This board has 16 pins. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. There are 6bits in its design. The superior flexibility is achieved through the use of 7 circuits. The system runs on a power supply of 5V watts. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 4mA. This D latch consumes 8μA quiescent current at all. Additionally, it is characterized by DUMMY VAL. The number of channels is growing strong/weak: 6.
CD74HCT174M Features
Tube package
74HCT series
16 pins
6 Bits
5V power supplies
CD74HCT174M Applications
There are a lot of Texas Instruments CD74HCT174M Flip Flops applications.
- Parallel data storage
- Single Down Count-Control Line
- Latch
- Balanced Propagation Delays
- Balanced 24 mA output drivers
- Automotive
- CMOS Process
- Matched Rise and Fall
- Buffer registers
- Communications
