CD74HCT175M96G4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | MILITARY |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 33 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 13 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Number of Bits per Element | 4 |
| Prop. Delay@Nom-Sup | 53 ns |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CD74HCT175M96G4 Overview
In the form of SOIC, it has been packaged. A total of 1 elements are present. There are 16 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Power is provided by a 5V supply. A device of this type belongs to the family of HCT. Electronic part Surface Mountis mounted in the way. With its 16pins, it is designed to work with most electronic flip flops. There is a clock edge trigger type of Positive Edgeon this device. It is included in FF/Latches. In light of its reliable performance, this T flip flop is well suited for TR. The system runs on a power supply of 5V watts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Despite external influences, it consumes 8μAof quiescent current. In this case, the high level output current is set to -4mA. It is set to 4mAfor the low level output current. There should be a temperature below 125°Cduring operation. It is recommended that the operating temperature be greater than -55°C. Initially, it requires a voltage of 4.5V as the minimum supply voltage. The maximum supply voltage supported by the flip flop is 5.5V. It is possible to achieve 25MHz frequencies. In this case, it uses a D FLIP-FLOP logic IC. There are 1 functions available on this T flip flop. It is equipped with 16 pins.
CD74HCT175M96G4 Features
16 pins
5V power supplies
1 Functions
16 pin count
CD74HCT175M96G4 Applications
There are a lot of Texas Instruments CD74HCT175M96G4 Flip Flops applications.
- Cold spare funcion
- Data Synchronizers
- ESD performance
- Bounce elimination switch
- Set-reset capability
- Frequency division
- Memory
- Convert a momentary switch to a toggle switch
- Latch
- Common Clocks
