CD74HCT251M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT251 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 35 ns |
| Family | HCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT251M Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.digital switch ic uses the method of Surface Mount for mounting.A digital IC Multiplexer is used as the analog component of the multiplexers.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74HCT series.The basic configuration of this system includes 16 terminations.There is a base part number of 74HCT251 which can also be used in order to locate the logic switch that are related to this item.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.It employs GULL WING as the point at which conductors come to an end.As a type of supply, Single is employed.This multiplexer ic has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of HCT members.In this signal multiplexer, there are 8 bits that are provided.In order for 5V to operate normally, a power supply is provided.The turn signal switch operates with 1 outputs.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.In order to accept voltage levels, the multiplexers have input lines 2 on the board.
CD74HCT251M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
CD74HCT251M Applications
There are a lot of Texas Instruments CD74HCT251M Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Electronic circuits
- Analog, digital or video signal switching
- Decimal decoder
- Data demultiplexing
- Textile mills
- PCIe
- Medical industry
- Night vision cameras
- Logic gates for other digital devices
