CD74HCT253M
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT253 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 50 ns |
| Family | HCT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CD74HCT253M Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).In this case, it is packaged as Tube.The mounting method digital switch ic uses is Surface Mount.A digital IC Multiplexer is used as the analog component of the multiplexers.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.In addition to being a member of the 74HCT series, these multiplexers have a wide range of applications.There is a design for terminating 16 as part of its basic configuration.You can also find related parts by using its logic switch base part number of 74HCT253.For multiplexer's system, 5V voltage is supplied.This turn signal switch consists of 16 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.A total of 16 pins are configured on this board.Surface Mount is the way it is mounted.There is a family of HCT members.The multiplexer ic provides 4 bits.For mux switch's normal operation, power supply 5V is provided.In order for the turn signal switch to work, there are 1 outputs.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.This multiplexer has 8 inputs.It is possible to accept voltage levels through 2 input lines of multiplexers.
CD74HCT253M Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
CD74HCT253M Applications
There are a lot of Texas Instruments CD74HCT253M Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- CPU memory location identification
- Data collection system
- GLAN
- Electronics industry
- Arithmetic Logic Units
- Data bus control
- Frequency multiplexing system
- Time division multiplexing system
- Memory system of computers
